| Quantity: | |
|---|---|
Technical features:
Excellent cooling treatment is guaranteed by the high-pressure injection in the drawing die holders.
The wires have a high surface quality and low frictional noise thanks to the optimized path, including the R angle and inclination of the drawing capstans.
High-precision gears are utilized for transmission, with direct-drive motors powering each individual motor.
Minimal slip rate is maintained for each individual motor.
Technical parameters：
Model | FJL-700 | DLD1000 |
Material | Alloy wire | |
Max. inlet dia. | Ф12 | Ф8.0 |
Fnished dia. | Ф5.0-Ф8.0 | Ф3.5-Ф5.0 |
Coil diameter | ------ | φ900-φ1500 |
Dia. of drawing capstan | Ф700 | Ф1000 |
Numbers of dies | 3/4/5 | 1 |
Max. production speed | 130m/min | 150m/min |
Type of transmission | Individual drive | Gearbox |
Drive technology | Servo-Motor | Ac-Motor |
Structural form | Horizontal type | Upside down |
 |  |
Technical features:
Excellent cooling treatment is guaranteed by the high-pressure injection in the drawing die holders.
The wires have a high surface quality and low frictional noise thanks to the optimized path, including the R angle and inclination of the drawing capstans.
High-precision gears are utilized for transmission, with direct-drive motors powering each individual motor.
Minimal slip rate is maintained for each individual motor.
Technical parameters：
Model | FJL-700 | DLD1000 |
Material | Alloy wire | |
Max. inlet dia. | Ф12 | Ф8.0 |
Fnished dia. | Ф5.0-Ф8.0 | Ф3.5-Ф5.0 |
Coil diameter | ------ | φ900-φ1500 |
Dia. of drawing capstan | Ф700 | Ф1000 |
Numbers of dies | 3/4/5 | 1 |
Max. production speed | 130m/min | 150m/min |
Type of transmission | Individual drive | Gearbox |
Drive technology | Servo-Motor | Ac-Motor |
Structural form | Horizontal type | Upside down |
| |
English
简体中文